Fabrication of optical reflectors by using of elastomer with self-organized undulations

Back-surface diffusive reflectors have been widely applied in many optical systems to promote the efficiency used in system. In this work, we propose a novel way to fabricate a soft diffusive reflector by using of silicone (polydimethylsiloxane, PDMS). High-reflectance substrates were first fabricated by mixing nanoscaled TiO₂ powders with PDMS polymers, and then microscale wave-like undulations were spontaneously developed after the substrates were dipped into H₂SO₄/HNO₃ solutions. After optical examination, a TiO₂/PDMS plate comprising microscale undulations, which can surely serve as a reflector, could reflect and diffuse light effectively. Besides, all fabrication processes can be executed in the ambient environment and at low temperature. This proposed method has a potential for mass production in the future.     

Eisen, Stahl

Ohne Zusammenfassung     

Flow Injection Analysis of Aluminum Chlorohydrate in Antiperspirant Deodorants Using a Built‐in Three‐in‐one Screen‐Printed Silver Electrode

A screen‐printed silver strip with a built‐in three‐in‐one electrode (SPAgE) configuration of Ag‐working, Ag‐counter and Ag/Ag_xO (silver oxides) pseudoreference electrodes has been developed for sensitive and selective electrochemical flow injection analysis (FIA) of aluminum chlorohydrate (ACH) present in antiperspirants, through the free Cl^? ion liberated from ACH in aqueous medium, as a redox signal at Ag‐working electrode in pH 6 phosphate buffer solution (PBS). The solution phase and instrumental parameters were systematically optimized. The calibration graph was linear in the window 1–200 ppm concentration of ACH and the lowest detection limit (S/N=3) was 295 ppb with a slope of 0.0989 μA/ppm and regression coefficient of 0.998. Calculated relative standard deviation (RSD) values for the detection of 5 and 50 ppm ACH by this method are 2.21 % and 2.16 %, respectively. Four different antiperspirant deodorants real samples with and without ACH content were successfully analyzed and the detected values obtained were found to be in good agreement with the product labeled values.     

双稳系统的随机能量共振和作功效率

分析了处于双稳系统中的布朗粒子与外界的周期性外力和热随机力的功、热交互作用,建立了基于Langevin方程的随机能量平衡方程.围绕着受周期力、随机力和阻尼力共同作用的Langevin方程,采用动力学和非平衡热力学相结合的方法,从以"力"为立足点转到以"能量"为研究核心,深入分析了布朗粒子沿单一轨线运动时系统与环境之间的能量交换和作功效率,揭示了双稳系统的随机能量共振现象. 关键词： 双稳系统 随机能量共振 作功效率     

Angle-independent plasmonic infrared band-stop reflective filter based on the Ag/SiO₂/Ag T-shaped array

A plasmonic infrared (IR) filter assisted by localized surface plasmon polaritons (LSPPs) in a Ag/SiO?/Ag T-shaped array was theoretically and experimentally investigated. By using a Fourier transform infrared (FTIR) spectrometer, an angle-independent LSPP resonant mode caused by a Fabry-Pérot resonance in the structure was observed in agreement with the prediction from the rigorous coupled-wave analysis (RCWA) simulation. The resonant wavelength of the mode can also be controlled by modifying the geometry of the T-shaped structure. Such LSPP property can be used as an IR reflection-type band-stop filter with a single spectral bandwidth and an ultrahigh immunity to incident angles.     

Thermal degradation kinetics of biodegradable poly(3‐hydroxybutyrate)/layered double hydroxide nanocomposites

The thermal degradation behaviors of biodegradable poly(3‐hydroxybutyrate) (PHB) and PHB/poly(ethylene glycol) phosphonates (PEOPAs)‐modified layered double hydroxide (PMLDH) nanocomposites have been investigated using thermogravimetric analysis. Effects of PMLDH contents on the isothermal degradation kinetics of PHB were explored. These experimental results show that the degradation kinetics of PHB/PMLDH nanocomposites is the chain‐scission process of cyclic β‐elimination reaction with the following autocatalytic reactions, which is very similar to that of pure PHB matrix. Further calculated data based on the autocatalytic model can fit very well with the experimental data. The E_a value of PHB/PMLDH nanocomposites is increased as the content of PMLDH increases. This can be attributed to the incorporation of more PMLDH loading to PHB induced a decrease in the degradation rate and an increase in the residual weight for PHB/PMLDH nanocomposites. © 2008 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 46: 1207–1213, 2008     

Discovery of New Natural Products by Intact‐Cell Mass Spectrometry and LC‐SPE‐NMR: Malbranpyrroles,Novel Polyketides from Thermophilic Fungus Malbranchea sulfurea

Six photosensitive polyketides, malbranpyrroles A–F, were discovered from the thermophilic fungus Malbranchea sulfurea by using intact‐cell desorption/ionization on silicon mass (ICD‐MS) and LC‐SPE‐NMR. These two strategies facilitate the searching and structural determination of unstable natural products. The ICD‐MS indicated that only brown hyphae of M. sulfurea can produce malbranpyrroles. The biosynthetic pathway of malbranpyrroles was evidenced by ¹³C isotope precursors and amino acid feeding experiments. The cytotoxicity data revealed that the conformation of the conjugated system in malbranpyrroles does not affect cytotoxic potency against cancer cell lines. In addition, the chlorine atom was shown to be the pharmacophore for cytotoxicity.     

Crystallization kinetics and melting behavior of metallocene short‐chain branched polyethylene fractions

Metallocene polyethylene (mPE) fractions are recognized as being more homogeneous with respect to short‐chain branch (SCB) distribution as compared with unfractionated mPEs. Differential scanning calorimetry and polarized optical microscopy (POM) were used to study the influences of SCB content on the crystallization kinetics, melting behavior, and crystal morphology of four butyl‐branched mPE fractions. The parent mPE of the studied fractions was also investigated for comparative purposes. mPE fractions showed a much simpler crystallization behavior as compared with their parent mPE during the cooling experiments. The Ozawa equation was successfully used to analyze the nonisothermal crystallization kinetics of the fractions. The Ozawa exponent n decreased from about 3.5 to 2 as the temperature declined for each fraction, indicating the crystal‐growth geometry changed from three‐dimensional to two‐dimensional. For isothermal crystallization, the fraction with a lesser SCB content exhibited a higher crystallization temperature (T_c) window. The results from the Avrami equation analysis showed the exponent n values were around 3 (with minor variation), which implied that the crystal‐growth geometry is pseudo‐three‐dimensional. Both of the activation energies for nonisothermal and isothermal crystallization were determined for each fraction with Kissinger and Arrhenius‐type equations, respectively. Double melting peaks were observed for both nonisothermally or isothermally crystallized specimens. The high‐melting peak was confirmed induced via the annealing effect during heating scans. The Hoffman–Weeks plot was inapplicable in obtaining the equilibrium melting temperature (T_m°) for each fraction. The relationship between T_c and T_m for the fractions is approximately T_m = T_c (°C) + 8.3. The POM results indicated that the crystals of parent or fractions formed under cooling conditions did not exhibit the typical spherulitic morphology as a result of the high SCB content. © 2002 John Wiley & Sons, Inc. J Polym Sci Part B: Polym Phys 40: 325–337, 2002